Blueprint Reading for Welders more books like this

by A E Bennett

This text provides complete, hands-on practice in reading and interpreting blueprints. Step-by-step, students are shown how to develop the necessary skills to interpret all types of working sketches and prints, from the simplest to the most complex. The spiral binding should make it easy to use this book side-by-side with blueprints. This edition ...

see all copies from $1.99!

new only from $78.74! | first editions | SVS

Physical metallurgy principles more books like this

by Robert E. Reed-Hill

Physical Metallurgy Principles is intended for use in an introductory course in physical metallurgy and is designed for all engineering students at the junior or senior level. The approach is largely theoretical, but covers all aspects of physical metallurgy and behavior of metals and alloys. The treatment used in this textbook is in harmony with ...

see all copies from $27.96!

new only from $52.20!

Mechanical Metallurgy more books like this

by George Ellwood Dieter

This revised third edition of a bestselling metallurgy text examines the behaviour of materials under stress and their reaction to a variety of hostile environments. It covers the entire scope of mechanical metallurgy, from an understanding of the continuum description of stress and strain, through crystalline and defect mechanisms of flow and ...

see all copies from $20.00!

new only from $72.26! | first editions | SVS

How to Cast Small Metal & Rubber Parts more books like this

by William A Cannon

This is a make-your-own guide for hard-to-find small parts! Using this excellent sourcebook as a guide, you can easily make high quality, defect-free castings for almost any purpose ...at amazingly low cost! Just some of the countless uses you'll find for this potentially profitable skill ...making obsolete or vintage car parts, hood ornaments, ...

see all copies from $9.37!

new only from $9.37!

Metallurgy Fundamentals more books like this

by Daniel A Brandt

Metallurgy Fundamentals provides instruction and information on the basic principles of metallurgy. It explores the reasons for the strange ways that metals behave when they are heated and cooled. It explains why the strength and hardness of metal changes after being heated and cooled in certain ways. A knowledge of these principles and ...

see all copies from $2.99!

new only from $79.29!

Practical Metallurgy and Materials of Industry more books like this

by John Neely

For undergraduate courses in Materials Science and Metallurgy. This practical introduction to engineering materials/metallurgy maintains a low mathematical level designed for two-year technical programs and four-year engineering technology programs. The easy-to-read, highly-accessible Sixth Edition includes many of the latest industry processes ...

see all copies from $1.99!

new only from $47.00! | first editions | SVS

Marine Ecological Processes more books like this

by Ivan Valiela

Marine Ecological Processes is a modern review and synthesis of marine ecology that provides the reader - particularly the graduate student - with a lucid introduction to the intellectual concepts, approaches, and methods of this evolving discipline. Comprehensive in its coverage, this book focuses on the processes controlling marine ecosystems, ...

see all copies from $20.00!

new only from $29.99! | first editions | SVS

Metallography principles and practice more books like this

by Vander Voort

see all copies from $18.27!

new only from $167.28! | first editions

Metal Fatigue in Engineering more books like this

by Ralph Hralph Ivann Stephens, H O Fuchs

Stresses on metal such as weight loads, torque, or friction cause fatigue on the member under analysis. This can result in cracking and the ultimate failure of the member.

see all copies from $24.00!

new only from $112.43! | first editions | SVS

Machine Shop Trade Secrets more books like this

by James A Harvey

Written by an experienced machinist and plastic injection mold maker, this groundbreaking manual will have users thinking and producing like experienced machinists. it provides practical "how-to" information that can immediately be used to improve one's machining skills, craftsmanship, and productivity.

see all copies from $38.14!

new only from $38.14! | SVS

Phase transformations in metals and alloys more books like this

by David A Porter

"Phase Transformations in Metals and Alloys, Third Edition" provides a comprehensive overview of specific types of phase transformations, supplemented by practical case studies of engineering alloys. This new edition now addresses computer-aided calculation of phase diagrams, which has undergone major changes in recent years. It also expands ...

see all copies from $12.78!

new only from $63.00! | first editions

Metallurgy more books like this

by B. J. Moniz

see all copies from $15.00!

new only from $60.74! | first editions

Foundrywork for the Amateur more books like this

by Bernard Terry Aspin

An introduction to casting in most metals. Subjects covered include crucibles and melting methods, moulding sands and mixtures, making moulding boxes, patterns and cores, preparing a mould, melting ferrous and non-ferrous metals and tools.

see all copies from $4.25!

new only from $7.68! | signed copies | first editions

Welding skills and practices more books like this

by Joseph William Giachino

see all copies from $1.99!

new only from $68.00!

Introduction to Physical Metallurgy more books like this

by Sidney H Avner

see all copies from $6.00!

SVS

Practical Problems in Mathematics for Welders more books like this

by Frank R. Schell, Bill J. Matlock

This workbook, offers a concise review of the mathematic principles used in the welding shop. Each unit begins with a review of the basic procedures used in standard operations, and builds to feature more advanced formulas and procedures. Special enhancements of this fourth edition include updates on present-day shop practices to give students an ...

see all copies from $5.00!

new only from $14.99!

Recovery and Refining of Precious Metals more books like this

by C W Ammen

A practical guide to recovering, testing, extracting, and refining precious metals, from primary and secondary sources. Topics covered include recovery methods for primary ores, black sand, scrap jewellery, old title and electronic scrap.

see all copies from $145.00!

new only from $145.00! | first editions

Problems in Metallurgical Thermodynamics and Kinetics more books like this

by G. S. Upadhyaya

see all copies from $94.94!

Handbook of Lithium and Natural Calcium Chloride more books like this

by Donald E Garrett

This book is concerned with two major industrial minerals: Lithium and Calcium Chloride. The geology of their deposits is first reviewed, along with discussions of most of the major deposits and theories of their origin. The commercial mining and processing plants are next described, followed by a review of the rather extensive literature on other ...

see all copies from $101.29!

new only from $122.64! | SVS

The Complete Handbook of Sand Casting more books like this

by C. W. Ammen

see all copies from $11.17!

new only from $11.17! | SVS

Blacksmithing Basics for the Homestead more books like this

by Joe Delaronde, Jess Leonard (Photographer)

Traditional blacksmithing returns to its home roots with "Blacksmithing for the Homestead". Here, author and master blacksmith Joe DeLaRonde demonstrates the basic skills and techniques needed to make the tools and accoutrements required for life on the homestead or ranch. Detailed and easy-to-understand instructions, illustrations, and ...

see all copies from $11.48!

new only from $11.48!

Metal forming mechanics and metallurgy more books like this

by Hosford, Caddell

This book helps the engineer understand the principles of metal forming and analyze forming problems - both the mechanics of forming processes and how the properties of metals interact with the processes. The first third of the book is devoted to fundamentals of mechanics and materials; the middle to the analyses of bulk forming processes like ...

see all copies from $47.99!

new only from $69.00!

Out of the Fiery Furnace: The Impact of Metals on the History of Mankind more books like this

by Robert Raymond

see all copies from $30.07!

first editions

Stability of Microstructure in Metallic Systems more books like this

by John Wilson Martin, R D Doherty

The second edition of this textbook, popular amongst students and faculty alike, investigates the various causes of thermodynamic instability in metallic microstructures. Materials theoretically well designed for a particular application may prove inefficient or even useless unless stable under normal working conditions. The authors examine ...

see all copies from $25.00!

new only from $28.50! | first editions | SVS

Welding Handbook, (Whb-5) Vol. 5: Engineering, Costs, Quality & Safety more books like this

by American Welding Society

see all copies from $5.00!

new only from $65.75!