Excerpt: ...To obtain it in drams, divide the latter number by 17,3 as 1 dram is equal to 17,3 deniers. Suppose we find 20 cocoon ends in a thread of silk: add 1/3, and we have 26-2/3 deniers, which, divided by 17,3 make 1,54 drams. As silk is always more or less uneven, it is safer to count the cocoon fibers of several threads and to take average ...Read MoreExcerpt: ...To obtain it in drams, divide the latter number by 17,3 as 1 dram is equal to 17,3 deniers. Suppose we find 20 cocoon ends in a thread of silk: add 1/3, and we have 26-2/3 deniers, which, divided by 17,3 make 1,54 drams. As silk is always more or less uneven, it is safer to count the cocoon fibers of several threads and to take average thereof. It requires the experience of years to judge with any degree of certainty as to the origin and quality of silk, whether it be "classical," "extra," "sublime," etc. There are machines wherewith to ascertain exactly the twist, that is, the number of turns the silk has received in the throwing process. In the dyeing we distinguish two great classes, of which the names themselves give a good definition. "Bright" has a brilliant luster, while "souple" has more of a dull, subdued appearance. To find out whether the silk has been weighted in the dyeing process, we may compare it with other silk of which the exact conditions are known, or we may burn a small quantity of it. Unweighted silk does not burn readily and leaves a residue of white ashes, while heavy weighted silk burns lively, leaving black, charry ashes. pg 70 4. REED CALCULATION We count the number of repeats of the weave in a given space, generally 1/4 or 1/2 inch, and multiply this with the number of threads one repeat contains, which gives us the reduction of the warp. Suppose we had a taffeta, which, as we know, has only 2 ends to a repeat, and counted 30 interlacings per 1/4 inch on one pick; we would have 60 threads per 1/4 inch or 240 per one inch. In this case the reed may be 80 by 3 or 60 by 4. Another instance: In an 8-shaft satin we count 10 warp-threads, which bind on the same pick in 1/4 inch; this, multiplied by 8, equals 80 ends per 1/4, or 320 per one inch; the reed will be an 80 with 4 in a dent or a 64 by 5. In short, the number of the reed is found by dividing the number of warp-threads that are to go in one dent, in the number ofRead Less
New in New jacket. Book. 8vo-over 7.75-9.75 inches tall. NOTE: THIS IS NOT A FACSIMILE REPRINT. Our books are completely re-typeset and re-designed in a manner respectful of the original volume. This avoids the inevitable reproduction of aging, foxing and paper discoloration of a facsimile edition. Every page is careully proofread to discover typos anf other unwanted characters. We print on opaque, cream-coloured 70lb offset text stock. Chapter initials are in colour. Any illustrations are digitally enhanced. Full-page photographic and/or engraved plates are tissue-guarded. Covers are bound in the half-calf manner with maroon vinyl book cloth. All books have a red-ribbon bookmark, laminated jackets for cleanliness and durability plus royal-red inside covers and parchment end papers. Most books have either a new frontispiece illustration of the author, a short biography or both. Cover and jacket designs are consistent across all titles, appropriate for a collectable library. All books are made in the U.S. A and your satisfaction is guaranteed. (A RECENT NOTE from a customer "...It is a relief not to have a facsmile. The rinting is clear and the book is very well bound."--RF, Baltimore, MD.
Copyright in bibliographic data and cover images is held by Nielsen Book Services Limited, Baker & Taylor, Inc., or by their respective licensors, or by the publishers, or by their respective licensors. For personal use only. All rights reserved. All rights in images of books or other publications are reserved by the original copyright holders.